HP Model 730 - Workstation Betriebsanweisung

4-1Installing the Workgroup EISA HP Adapter HardwareChapter 4Installing the Workgroup EISA HPAdapter HardwareThis chapter explains how to install the

4-10Workgroup CDDI/FDDI EISA HP Adapter User GuideThe TCP measurements format of the ttcp command is as follows:From the receiver:Elvis-fddi: ttcp -r

4-2Workgroup CDDI/FDDI EISA HP Adapter User GuideInserting the EISA HP AdapterOnce you have removed the workstation’s top cover and located an availab

4-3Installing the Workgroup EISA HP Adapter HardwareStep 2 Model 750: unscrew the knob to remove the top and side covers.Push down on the top of the r

4-4Workgroup CDDI/FDDI EISA HP Adapter User GuideStep 4 Without touching any electrical components, slide the adapter intothe slot. Press firmly into p

4-5Installing the Workgroup EISA HP Adapter HardwareNote You must install the EISA HP adapter driver and utilities before yourworkstation is logically

4-6Workgroup CDDI/FDDI EISA HP Adapter User GuideRingop LEDVerify connection to the ring by observing the ringop LED.In a single attachment configurati

4-7Installing the Workgroup EISA HP Adapter HardwareVerifying the InstallationYou can verify the installation of your EISA HP adapter by viewing the s

4-8Workgroup CDDI/FDDI EISA HP Adapter User GuideConfirming IP, Netmask, and Broadcast AddressesAfter installing the adapter driver and hardware, use t

4-9Installing the Workgroup EISA HP Adapter Hardware64 bytes from 198.133.219.99: icmp_seq=2. time=0. ms64 bytes from 198.133.219.99: icmp_seq=3. time