HP EliteBook Folio 9480m Notebook PC Bedienungsanleitung PDF herunterladen (Seite 59)

If you add or upgrade a hard drive and intend to set a RAID volume, you must temporarily disable

SRT, set the RAID volume, and then enable SRT. To temporarily disable SRT:

1. Select Start > All Programs > Intel > Intel Rapid Storage Technology.

2. Click the Acceleration link, and then click the Disable Acceleration link.

3. Wait for the Acceleration Mode to complete.

4. Click the Reset to Available link.

IMPORTANT: You must temporarily disable SRT when changing RAID modes. Make the change

and then re-enable SRT. Failure to temporarily disable this feature will prevent you from creating or

changing RAID volumes.

NOTE: HP does not support SRT with self-encrypting drives (SEDs).

Removing or replacing the hard drive cover

Removing the hard drive cover

Remove the hard drive cover to access the hard drive.

1. Remove the battery (see

Removing a battery on page 39).

2. Loosen the 2 hard drive cover screws (1). Slide the hard drive cover outward (2) from the

computer, and then remove the cover (3).

Replacing the hard drive cover

Replace the hard drive cover after accessing the hard drive.

1. Align the tabs on the hard drive cover (1) with the notches on the computer.

Using hard drives 49

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 102 103

Keine Kommentare

HP EliteBook Folio 9480m Notebook PC Bedienungsanleitung Seite 59