HP CQ5110F - Presario - 3 GB RAM Technical Information PDF herunterladen (Seite 63)

Optical drive

Description Spare part number

DVD±RW SuperMulti DL Drive with LightScribe 608021-001

Blu-ray ROM with LightScribe DVD±R/RW SuperMulti DL Drive 608022-001

Before removing the optical drive, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

Remove the battery (see

Battery on page 40).

Remove the memory/wireless module compartment cover (see

Memory module on page 41)

Remove the hard drive cover (see

Hard drive on page 50)

Remove the optical drive:

Position the computer upside down with the front toward you.

2. Remove the Phillips PM2.5x5.0 screw (1) that secures the optical drive to the computer.

3. Use a flat-bladed screwdriver or similar tool to push the drive bracket to the left (2) to release the

optical drive.

4. Remove the optical drive (3).

If it is necessary to replace the optical drive bracket, position the optical drive with the optical

drive bracket toward you.

Component replacement procedures

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 128 129

Keine Kommentare

HP CQ5110F - Presario - 3 GB RAM Technical Information Seite 63