HP Computer Spezifikationen PDF herunterladen (Seite 100)

Optical drive connector cable

Description Spare part number

Optical drive connector cable 720668-001

Before removing the optical drive connector cable, follow these steps:

1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

4. Remove the battery (see

Battery on page 47), and then remove the following components:

a. Optical drive (see

Optical drive on page 48)

b. Hard drive (see

Hard drive on page 49)

c. WLAN module (see

WLAN module on page 52)

d. Keyboard (see

Keyboard on page 56)

e. Top cover (see

Top cover on page 60)

f. System board (see

System board on page 73)

Remove the optical drive connector cable:

1. Release the optical drive connector cable from the clips (1) and routing channel built into the

base enclosure.

2. Remove the optical drive connector cable (2).

Reverse this procedure to install the optical drive connector cable.

90 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 119 120

Keine Kommentare

HP Computer Spezifikationen Seite 100