HP XP12000 Bedienungshandbuch PDF herunterladen (Seite 32)

Operating specifications

This section provides some general specifications. For complete specifications, see the system site

preparation guide, available on the HP XP Disk Array website:

http://h18006.www1.hp.com/storage/xparrays.html

Temperature

Table 4 Temperature specifications

RangeTemperature range type

21 to 24 degrees C, 70 to 75 degrees FRecommended operating temperature range

16 to 32 degrees C, 61 to 89 degrees FOperating temperature

–10 to +43 degrees C, 14 to 109 degrees FNonoperating temperature range

–25 to +60 degrees C, –13 to +140 degrees F

Shipping and storage temperature (product

packed in factory packing)

10 degrees C per hour, 18 degrees F per hour

Temperature shock immunity (maximum rate of

temperature change)

At 40 degrees C, 104 degrees FOver-temperature warning

At 60 degrees C, 140 degrees FOver-temperature shutdown

Humidity

Protect the disk array from excessive humidity. You should not observe condensation in or around the

product under any conditions. There is no procedure for recovery from moisture condensation.

Table 5 Humidity specifications

Noncondensing relative humidity

(RH)

Humidity range type

50% to 55%

Recommended operating humidity range at 22 degrees C (71

degrees F)

20% to 80%Operating humidity range at 22 degrees C (71 F)

8% to 90%Nonoperating humidity range

5% to 95%

Shipping and storage humidity range (product packed in factory

packing)

Mechanical vibration

Maximum operating acceleration is 0.05G at a frequency range of 10 to 300 Hz.

HP XP12000 operations32

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 55 56

Keine Kommentare

HP XP12000 Bedienungshandbuch Seite 32