HP 3PAR Schnellstart Anleitung PDF herunterladen

HP 3PAR StoreServ File CTRL

v2 Quick Start Guide

IMPORTANT: Read this document first.

Microsoft® and Windows® are U.S. registered trademarks of Microsoft

Corporation.

*C8S69-96033*

HP Part Number: C8S69-96033

Published: March 2014

Edition: 1

Supported storage systems

These installation instructions apply to HP 3PAR StoreServ

File CTRL v2, which is based on the HP ProLiant DL380p

Gen8 server platform.

For details and specifications, see the HP 3PAR StoreServ

File CTRL v2 QuickSpecs available at:

http://www.hp.com/go/3PARStoreServ

For general information about HP ProLiant Gen8 servers,

go to:

http://www.hp.com/go/proliantgen8/docs

IMPORTANT: Included with your storage system

is the HP Storage System Recovery DVD. This DVD

is used to restore the system to factory defaults.

Keep this DVD in a safe place.

The Microsoft Windows Storage Server 2012 / 2012

R2 Standard Edition operating system is preinstalled

and activated on all systems.

Record network information

It is critical to have the correct networking information

available before proceeding with the system installation

and configuration. It may be necessary to pre-stage DNS

information. Contact your system administrator to clarify

network configuration requirements.

IMPORTANT: Before joining the 3PAR StoreServ

File CTRL v2 system nodes to the Active Directory

domain, ensure that there is network connectivity

between each node and the domain controller.

The HP 3PAR StoreServ File CTRL v2 requires a minimum

of 6 IP addresses. These addresses may be statically

assigned or assigned by a DHCP server or both. If you

are using static addressing or a DHCP server that does

not automatically update DNS, ensure that both forward

and reverse DNS information (A and PTR records) is

pre-staged in the DNS server.

Use Table 1 (page 1) or Table 2 (page 1), depending

on your system configuration, to document your network

information before proceeding with system setup.

Table 1 Network information (clustered system)

IP address

Fully qualified DNS

name (FQDN)Network device

Node 1 iLO

Node 2 iLO

Node 1

Table 1 Network information (clustered system)

(continued)

IP address

Fully qualified DNS

name (FQDN)Network device

Node 2

Cluster

First file server

Table 2 Network information (standalone system)

IP address

Fully qualified DNS

name (FQDN)Network device

System

iLO

Restrictive Active Directory environments

If the HP 3PAR StoreServ File CTRL v2 system is placed

in a restrictive Active Directory environment, it may

require pre-staging Active Directory objects or certain

administrative permissions. See the following Microsoft

articles for more information:

• How to Create a Cluster in a Restrictive Active

Directory environment

• Failover Cluster Step-by-Step Guide: Configuring

Accounts in Active Directory

Validate network information

Confirm that the IP address and names are not already

in use.

Complete the tests in Table 3 (page 1) or Table 4 (page

1), depending on your configuration, to verify network

connectivity. Consult with your network administrator to

confirm test results.

Table 3 Validation tests (clustered system)

Successful?

(Y/N)Command(s) to executeTest

ping <node 2 address>Ping the IP address

of Node 2 from

Node 1.

ping <node 2 name>

ping <node 2 fqdn>

Ping the name of

Node 2 from Node

ping <node 1 address>Ping the IP address

of Node 1 from

Node 2.

ping <node 1 name>

ping <node 1 fqdn>

Ping the name of

Node 1 from Node

Table 3 Validation tests (clustered system) (continued)

Successful?

(Y/N)Command(s) to executeTest

nslookup <node 1

address>

nslookup <node 1 name>

Verify forward and

reverse DNS

information for

Node 1 is correct.

nslookup <node 1 fqdn>

nslookup <node 2

address>

nslookup <node 2 name>

Verify forward and

reverse DNS

information for

Node 2 is correct.

nslookup <node 2 fqdn>

ping <domain controller

address>

ping <domain controller

name>

Ping the domain

controller from

Node 1.

ping <domain controller

fqdn>

ping <domain controller

address>

ping <domain controller

name>

Ping the domain

controller from

Node 2.

ping <domain controller

fqdn>

pathping <domain

controller address>

pathping <domain

controller name>

Verify the network

path to the domain

controller and DNS

servers is correct.

pathping <DNS server

address> (repeat for each DNS

server)

pathping <DNS server

name> (repeat for each DNS

server)

Table 4 Validation tests (standalone system)

Successful?

(Y/N)Command(s) to executeTest

ping <system address>Ping the IP address

of the StoreEasy

system from

another system on

the same network.

ping <system address>Ping the IP address

of some other

system on the same

network form the

StoreEasy system.

ping <node 1 name>

ping <node 1 fqdn>

Ping the name of

the StoreEasy

system from

another system on

the same network.

Page 1

1 2

Inhaltsverzeichnis

Seite 1 - HP 3PAR StoreServ File CTRL

Seite 2 - Documentation feedback

Table 4 Validation tests (standalone system) (continued)Successful?(Y/N)Command(s) to executeTestping <node 1 name>ping <node 1 fqdn>Ping

Weitere Dokumente für Vernetzung HP 3PAR

Um das Dokument anzuzeigen HP 3PAR Betriebsanweisung

HP 3PAR Betriebsanweisung (53 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

HP 3PAR Schnellstart Anleitung

Stöbern Sie online oder laden Sie Schnellstart Anleitung nach Vernetzung HP 3PAR herunter. HP 3PAR Quick Start Guide Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Vernetzung HP 3PAR

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung HP 3PAR